630 Chair Specifications
| Specifications Chart | |
|---|---|
|
Patient Weight (maximum): 630 (w/standard base) 630 (w/rotational base) |
650 lbs (294 kg) 650 lbs (294 kg) |
| Paper Roll (maximum size): | 18 in. long x 3.5 in. diameter (45.7 cm x 8.9 cm) |
| Range of Motion and Dimensions: | Refer to: Range of Motion and Dimensions |
|
Weight of Chair: 630 w/ upholstery (standard base) w/ packaging and skid (no uph.) 630 w/ upholstery (rotational base) w/ packaging and skid (no uph.) Upholstery w/ packaging (shipped separately) |
475 lbs (215 kg) 530 lbs (240 kg) 550 lbs (249 kg) 605 lbs (274 kg) 45 lbs (20 kg) |
| Power Cord Length: | 8 ft. (243.8 cm) long |
| Electrical Requirements: | Refer to: Model Identification / Compliance Charts |
| Foot / Hand Control Voltage: | 12 VDC, SELV (Safety Extra Low Voltage) |
|
Duplex Receptacles Maximum Load: Not available on rotation models. |
115 VAC, 3A, 50/60 Hz |
|
Fuse Ratings: F1, F2, and F3 (on Motor Control Hub board): F3, F4, and F5 (on Power Supply board) F1 and F2 (on Power Supply board): |
5A, 250V, Type-T, 5 x 20 mm 10A, 250V, Type-T, 5 x 20 mm 6.3A, 250V, Type-T, 5 x 20 mm |
|
Duty Cycle Motor Run Time:
Receptacles: |
Intermittent Operation Domestic: 30 seconds On / 5 minutes off Export: 30 seconds On / 5 minutes off
Continuous Operation |
| Classifications: |
Class I, Type B Applied Part Intermittent Operation Domestic: 30 seconds On / 5 minutes off Export: 30 seconds On / 5 minutes off |
| Protection against ingress of fluids: | IPXO (Foot Control only: IPX1) |
