230 Universal Procedures ChairWeights, Dimensions and Electrical Specifications
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air, or with oxygen, or nitrous oxide.
| Weights, Dimensions, Electrical Specifications | |
|---|---|
|
Maximum Patient Weight |
450 lbs (204.1 kgs) |
|
Maximum size Paper Roll |
18 in. long x 3.5 in. diameter (45.7 x 8.9 cm) |
|
Range of Motion and Dimensions |
See illustration |
|
Weight of 230 - w/standard base |
455 lbs (206.4 kg) |
|
Weight of 230 - w/standard base, w/packaging and skid |
510 lbs (231.3 kg) |
|
Weight of 230 - w/rotational base |
540 lbs (244.9 kg) |
|
Weight of 230 - w/rotational base, w/packaging and skid |
600 lbs (271.1 kg) |
|
Power Cord |
8 ft. (243.8 cm) long |
|
Electrical Requirements |
See Compliance Charts |
|
Foot / Hand Control Voltage |
10 VAC, SELV (Safety Extra Low Voltage) |
|
Duplex Receptacle (optional) maximum load |
115 VAC, 3A, 50/60 Hz |
|
Main Power Fuse (located at power cord inlet): F1 and F2 |
6.3A, 250V, Type-T, 5 x 20 mm High-Breaking Current |
|
Upholstery Heater Fuse (located on uph. heater PC board): F1 and F2 |
1/2 A, 250V, Type-T, 1-1/4" x 1/4" |
|
Duty Cycle - motor run time |
Intermittent Operation. 30 seconds On / 5 minutes off. |
|
Classifications |
Class 1, Type B Applied Part |
|
Protection against ingress of fluids |
Ordinary Equipment |
|
Foot Control only |
IPX1 |
|
Regulatory Compliance: |
See Compliance Charts |
|
Chair Speeds by function |
|
|
Base / Back / Tilt (all models) |
15 - 25 seconds |
|
Foot (230) |
less than 20 seconds |
