230 Universal Procedures Chair Rotational Base Brake System Foot Control Inlet / Power Inlet / EMI FIlter Board Replacement
|
Model |
230-003 |
| Serial Number | All |
Removal
1.Separate upper and lower base castings. Refer to:Rot. Base Brake System
2.Turn lower base casting upside down. Remove bottom cover.
To remove foot control inlet
1.Unscrew lock nut.
2.Remove foot control inlet / harness assembly.
To remove EMI filter board
1.Tag and disconnect all wires to board.
2.Remove board from mtg. studs.
To remove power inlet
1.Tag and disconnect all wires to power inlet.
2.Pry power inlet out of bottom cover.
