230 Universal Procedures Chair Rotational Base Brake System Brake Pedal Switch Replacement Test and Repair
Model |
230-003 |
Serial Number | All |
1.Raise base shrouds. Refer to: Base Shrouds
2.Remove two screws from shroud spacer.
3.Remove brake pedal.
Pivot brake pedal toward column, then press down and push forward to release.
4.Tag and disconnect wires from switch. Remove switch.
1.Install switch. Connect wires to proper terminals.
2.Install brake pedal. Connect wires to proper terminals.
3.Secure shroud spacer w/ two screws. Lower base shrouds.