Midmark® 1000 Specifications
Equipment not suitable for use in the presence of a flammable anesthetic mixture.
The Acteon Newtron® LED scaler complies with current electromagnetic compatibility standards. However, it must not be used by or on those with cardiac stimulators or other active implants unless adequate electromagnetic interference shielding is present. Check with a cardiologist to verify the EMI shielding capabilities of the implant. See enclosed Newtron® LED manual for further advisories.
| Specifications | |
|---|---|
|
Cart |
|
|
Width |
23 inches (58.42 cm) |
|
Length |
18 1/2 inches (46.99 cm) |
|
Height |
36 1/2 inches (92.71 cm) |
|
Weight |
130 lbs (58.97 kg) |
|
Shipping Weight |
150 lbs (68.04 kg) |
|
Top of Cart Weight Restriction |
25 lbs (11.33 kg) |
|
Electrical - Refer to: Regulatory Compliance Chart |
|
|
Fuse (Scaler Transformer) |
800mA, 250 V, 3AG SLO BLO |
|
Power Cord Length |
10 footHospital Grade |
|
Handpiece |
|
|
Connection Type |
Midwest 4-Hole Type Handpiece |
|
Compressor |
|
|
Motor |
Oil Free 1/3 HP |
|
Working Pressure |
70-100 PSI |
|
Flow Rate |
2.5 scfm @ 40 PSI |
|
Sound Level (full load) |
40 dB |
|
Air Tank |
1 Gallon |
|
Water Module |
|
|
Reservoirs |
Two - 1 Liter - Toggled |
|
Pressurized System |
30-40 PSI |
|
Handpiece Flush System |
Manual |
|
Air and Water Connections |
External Quick Connects |
|
Other |
|
|
Duty Cycle |
Continuous Operation Note: Exception, Units with LED Scaler - 10 min. ON, 5 min. OFF |
|
Classifications |
Class 1, Type B Applied Part, Ordinary Equipment [IPXO] |
