Procenter Unit Flex Arm Lock Pawl Removal / Installation Test and Repair
Procenter Unit Flex Arm Lock Pawl
Removal
The delivery unit will drop when clevis pin is removed in the following step. Use an assistant to hold the delivery unit, or place support under delivery unit prior to removing clevis pin. Failure to do so could result in personal injury or damage to delivery unit.
2.Remove retaining ring (1); then, while supporting delivery unit, remove clevis pin (2) and two lock pawls (3) from cylinder block assembly (4).
3.Remove two screws (5), two washers (6), and pivot bracket (7) from damaged lock pawl (3).
Installation
1.Secure pivot bracket (7) to lock pawl (3) with two washers (6) and two screws (5).
Be sure slotted holes in pivot brackets (7) are positioned over the ends of cylinder pin.
2.Insert clevis pin (2) thru one lock pawl (3), cylinder block (4), and other lock pawl (3); then secure clevis pin with retaining ring (1).
