Midmark® Dental LED Light Tension Test and Repair
To Adjust Tension at Arm / Yoke Pivot Joints
1.Remove neck cover as shown.
2.Loosen or tighten appropriate screws to adjust tension.
To Adjust Tension at Light Pivot Joint
1.Remove screw cover as shown.
2.Loosen set screw.
3.Loosen or tighten light pivot adjustment screw.
4.Tighten set screw.
To Adjust Flex Arm Tension
1.Remove end cap and top cover as shown.
2.Loosen or tighten adjustment nut as desired.
