M9/M11 Sterilizer Wiring Diagram
To prevent risk of shock always disconnect power before removing covers or performing any service procedure.
Some procedures require power to be connected with covers removed. Line voltage is present. Use extreme caution to prevent electric shock.
Model Range M9 and M11 -020 thru -022 w/ Old-style Solenoids
|
Model |
M9 -020 thru -022 | M11 -020 thru -022 |
| Serial Number | All | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| Item | Part Number | Description |
|---|---|---|
|
A |
015-1680-00 | Steam Temperature Sensor Harness |
|
B |
015-1552-00 | Water Level Sensor Harness |
|
C |
015-1638-00 | Air Solenoid Valve Harness |
|
D |
015-1554-00 | Main Harness |
|
E |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
F |
015-1639-00 | Heating Element Harness |
|
G |
015-1672-00 | Door Motor Harness |
|
H |
Fuse F1 Options | |
|
115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
||
|
230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm |
||
|
I |
Fuse F2 Options | |
|
115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
||
|
230V models: 8A, 250V, Fast-Acting, 5mm x 20mm |
||
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9 and M11 -020 thru -022 w/ New-style Solenoids
|
Model |
M9 -020 thru -022 | M11 -020 thru -022 |
| Serial Number | All | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| Item | Part Number | Description |
|---|---|---|
|
A |
015-1680-00 | Steam Temperature Sensor Harness |
|
B |
015-1552-00 | Water Level Sensor Harness |
|
C |
015-1638-00 | Air Solenoid Valve Harness |
|
D |
015-1554-00 | Main Harness |
|
E |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
F |
015-1639-00 | Heating Element Harness |
|
G |
015-1672-00 | Door Motor Harness |
|
H |
Fuse F1 Options | |
|
115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
||
|
230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm |
||
|
I |
Fuse F2 Options | |
|
115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
||
|
230V models: 8A, 250V, Fast-Acting, 5mm x 20mm |
||
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9D -020 and -022 w/ Old-style Solenoids
|
Model |
M9D -020 and -022 |
| Serial Number | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| Item | Part Number | Description |
|---|---|---|
|
A |
015-1680-00 | Steam Temperature Sensor Harness |
|
B |
015-1552-00 | Water Level Sensor Harness |
|
C |
015-1638-00 | Air Solenoid Valve Harness |
|
D |
015-1554-00 | Main Harness |
|
E |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
F |
015-1639-00 | Heating Element Harness |
|
G |
Fuse F1 Options | |
|
115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
||
|
230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm |
||
|
H |
Fuse F2 Options | |
|
115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
||
|
230V models: 8A, 250V, Fast-Acting, 5mm x 20mm |
||
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9D -020 and -022 w/ New-style Solenoids
|
Model |
M9D -020 and -022 |
| Serial Number | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| Item | Part Number | Description |
|---|---|---|
|
A |
015-1680-00 | Steam Temperature Sensor Harness |
|
B |
015-1552-00 | Water Level Sensor Harness |
|
C |
015-1638-00 | Air Solenoid Valve Harness |
|
D |
015-1554-00 | Main Harness |
|
E |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
F |
015-1639-00 | Heating Element Harness |
|
G |
Fuse F1 Options | |
|
115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
||
|
230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm |
||
|
H |
Fuse F2 Options | |
|
115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
||
|
230V models: 8A, 250V, Fast-Acting, 5mm x 20mm |
||
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9 and M11 -033 / -034
|
Model |
M9 -033 / -034 | M11 -033 / -034 |
| Serial Number | All | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| Item | Part Number | Description |
|---|---|---|
|
A |
015-1680-00 | Steam Temp. Sensor Harness |
|
B |
015-1552-00 | Water Level Sensor Harness |
|
C |
015-1638-00 | Air Solenoid Valve Harness |
|
D |
015-1554-00 | Main Harness |
|
E |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
F |
015-1639-00 | Heating Element Harness |
|
G |
015-1672-00 | Door Motor Harness |
|
H |
Fuse F1 Options | |
|
015-0346-10 |
115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
|
| 015-0346-14 |
230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm |
|
|
I |
Fuse F2 Options | |
| 015-0346-07 |
115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
|
| 015-0346-11 |
230V models: 8A, 250V, Fast-Acting, 5mm x 20mm |
|
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9 and M11 -040, -041, and -042
|
Model |
M9 -040 / -041 / -042 | M11 -040 / -041 / -042 |
| Serial Number | All | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| SW1 Settings | |
|---|---|
| 1 | On for Service Diagnostics |
| 2 | Unit Configuration |
| 3, 4, 5, 6 | Not Used, leave Off |
| 7 | Serial Number Entry |
| 8 | Not Used, leave Off |
| Item | Part Number | Description |
|---|---|---|
|
A |
015-3551-00 | Printer Harness |
|
B |
015-1680-00 | Steam Temp. Sensor Harness |
|
C |
015-3548-00 | Display Ground Harness |
|
D |
015-1552-00 | Water Level Sensor Harness |
|
E |
015-1638-00 | Air Solenoid Valve Harness |
|
F |
015-3550-00 | Vent / Fill Manifold Harness |
|
G |
015-1554-00 | Main Harness |
|
H |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
I |
015-1639-00 | Heating Element Harness |
|
J |
015-1672-00 | Door Motor Harness |
|
K |
Fuse F1 Options | |
| 015-0346-10 | Fuse (F1) 115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” | |
| 015-0346-14 | Fuse (F1) 230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm | |
|
L |
Fuse F2 Options | |
| 015-0346-07 | Fuse (F2) 115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” | |
| 015-0346-11 | Fuse (F2) 230V models: 8A, 2 50V, Fast-Acting, 5mm x 20mm | |
|
M |
015-10092-00 | Battery |
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9D -042
|
Model |
M9D -042 |
| Serial Number | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| SW1 Settings | |
|---|---|
| 1 | On for Service Diagnostics |
| 2 | Unit Configuration |
| 3, 4, 5, 6 | Not Used, leave Off |
| 7 | Serial Number Entry |
| 8 | Not Used, leave Off |
| Item | Part Number | Description |
|---|---|---|
|
A |
015-3551-00 | Printer Harness |
|
B |
015-1680-00 | Steam Temp. Sensor Harness |
|
C |
015-3548-00 | Display Ground Harness |
|
D |
015-1552-00 | Water Level Sensor Harness |
|
E |
015-1638-00 | Air Solenoid Valve Harness |
|
F |
015-3550-00 | Vent / Fill Manifold Harness |
|
G |
015-1554-00 | Main Harness |
|
H |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
I |
015-1639-00 | Heating Element Harness |
|
J |
Fuse F1 Options | |
| 015-0346-10 | Fuse (F1) 115V models: 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” | |
| 015-0346-14 | Fuse (F1) 230V models: 0.125A, 250V, Slo-Blo, 5mm x 20mm | |
|
K |
Fuse F2 Options | |
| 015-0346-07 | Fuse (F2) 115V models: 15A, 250V, Fast-Acting, 1/4” x 1-1/4” | |
| 015-0346-11 | Fuse (F2) 230V models: 8A, 2 50V, Fast-Acting, 5mm x 20mm | |
|
L |
015-10092-00 | Battery |
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
Model Range M9 and M11 -043
|
Model |
M9 -043 | M11 -043 |
| Serial Number | All | All |
Line voltage is present between Ground and Heater terminals at all times (L1 and L/N2 on PC board).
| SW1 Settings | |
|---|---|
| 1 | On for Service Diagnostics |
| 2 | Unit Configuration |
| 3, 4, 5, 6 | Not Used, leave Off |
| 7 | Serial Number Entry |
| 8 | Not Used, leave Off |
| Item | Part Number | Description |
|---|---|---|
|
A |
015-3551-00 | Printer Harness |
|
B |
015-1680-00 | Steam Temp. Sensor Harness |
|
C |
015-3548-00 | Display Ground Harness |
|
D |
015-1552-00 | Water Level Sensor Harness |
|
E |
015-1638-00 | Air Solenoid Valve Harness |
|
F |
015-3550-00 | Vent / Fill Manifold Harness |
|
G |
015-1554-00 | Main Harness |
|
H |
015-1640-00 | Hi Limit Sensor Jumper Wire |
|
I |
015-1639-00 | Heating Element Harness |
|
J |
015-1672-00 | Door Motor Harness |
|
K |
Fuse F1 Options | |
|
015-0346-10 |
115V models 0.25A, 250V, Slo-Blo, 1/4” x 1-1/4” |
|
|
|
015-0346-14 |
230V models 0.125A, 250V, Slo-Blo, 5mm x 20mm |
|
L |
Fuse F2 Options | |
| 015-0346-07 |
115V models 15A, 250V, Fast-Acting, 1/4” x 1-1/4” |
|
|
|
015-0346-11 |
230V Models 8A, 250V, Fast-Acting, 5mm x 20mm |
|
M |
015-10092-00 | Battery |
| Color Abbreviation Chart | ||
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
||
