M9/M11 Sterilizer Temperature Sensor Replacement Test and Repair
To prevent risk of shock always disconnect power before removing covers or performing any service procedure.
Model Range -020 thru -022, -033, -034
|
Model |
M9M11 -020 thru -022, -033, -034 |
| Serial Number | All |
1.Disconnect sensor harness from J12 on PC board.
2.Remove temperature sensor.
3.Apply hi-temp hydraulic sealant (Loctite 565) to temperature sensor threads. Do not use teflon tape!
4.Install temperature sensor.
5.Connect sensor harness to J12 on PC board.
Model Range -040 thru -043
|
Model |
M9M11 -040 thru -043 |
| Serial Number | All |
1.Disconnect sensor harness from J12 on PC board.
2.Remove temperature sensor.
3.Apply hi-temp hydraulic sealant (Loctite 565) to temperature sensor threads. Do not use teflon tape!
4.Install temperature sensor.
5.Connect sensor harness to J12 on PC board.
