604 Table Upholstery Access Procedures

604 Table Upholstery Locking Knobs 604 Install / Revove Upholstery

1.Rotate all locking knobs to unlocked positions.

There are four locking knobs under back section, and two knobs under seat section.

604 Table Upholstery Heater Harness

2.Disconnect upholstery heater harness, only on models with optional upholstery heater.

3.Remove upholstered top and footrest pad.

Slide upholstery up to remove from back support plate.

1.Position upholstered top and footrest pad on table.

Back support plate must slide under paper roll holder. Be sure locking knobs align with holes in back / seat mounting plates.

Equipment Alert

Be sure harness is not pinched between upholstery and upper wrap.

604 Table Upholstery Heater Harness

2.Connect upholstery heater harness, only on models with optional upholstery heater.

3.Rotate locking knobs to locked positions.