Canis Major Screen and Water Hose Test and Repair
Model |
CMDT | CMDT-WS 45 and 60 |
Serial Number | All | All |
The water screen is located behind the transparent end cap located underneath the drain pan. Water collected in a drain pan is strained through the screen and serves to catch hair, teeth, needles, and other solids.
The screen may need to be cleaned several times a day depending on types of procedures performed on the table. A clean screen will allow the table to drain properly and protects the pump, water hose, and drain line from obstructions and damage.
The 3” water hose connects between the drain pan’s drain assembly and the PVC elbow assembly which houses the water sensor and then connects to the pump inlet. The pump outlet hose connects to the 1/2” female outlet fitting on the back of the table. Water then drains to the facility’s waste water system from this location.
1.Remove screen from underneath table.
2.Remove any solid waste and rinse with water.
3.Install screen back into drain piping.