International (Whip) Delivery Syringe Tubing
Serial Number Range: Units w/ serial number prefix UW built before 5-1-00
International (Whip) Delivery Syringe Tubing Assembly
Older units have a sleeve [2.25 in. (5.7 cm) long] and an internal rod instead of the external tubing support shown. The assembly shown below replaces all international handpiece tubing designs. However, when replacing handpiece tubing on units with old style whip pivot (3), the new style whip pivot (4) must be ordered in addition to the assembly number.
Heated syringe tubing is slightly longer than standard handpiece tubing. Do not attempt to shorten tubing. The entire length of tubing is necessary for proper function of the heated syringe. Resistance measured across Molex connector must be 10+1 ohms at 77° F (25° C).
| International (Whip) Delivery Syringe Tubing | |||
|---|---|---|---|
| Item | Part Number | Description | Qty |
|
1 |
122161 | Set Screw | 1 |
|
2 |
Thread-locking Adhesive Apply to Set Screw (Item #1) | 1 | |
|
3 |
Pivot - Old style | NLA | |
|
4 |
Pivot Options - Required when replacing old style tubing assembly | ||
| 057-0590-00 | For 4-Port, Unheated - Shown | 1 | |
| 057-0590-00 | For 4-Port, Heated | 1 | |
| 5 | Syringe Tubing Assembly Options | ||
|
151941 |
4-Port, Unheated - Shown |
NLA |
|
| 151941-01 | 4-Port, Unheated - Shadow. Functionally identical. Color mismatch. | 1 | |
| 151921 | 4-Port, Heated | 1 | |
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
|||
Serial Number Range: Units w/ serial number prefix UW built after 5-1-00 and all units w/ serial number prefixes PK or V
International (Whip) Delivery Syringe Tubing Assembly
Tubing Colors
Serial Number Range: UA, UC, UK and UW - Sterling Grey
Serial Number Range: PJ, PK, PL and PM - Shadow Grey
Heated syringe tubing is slightly longer than standard handpiece tubing. Do not attempt to shorten tubing. The entire length of tubing is necessary for proper function of the heated syringe. Resistance measured across Molex connector must be 10+1 ohms @ 77° f (25° C).
| International (Whip) Delivery Syringe Tubing | |||
|---|---|---|---|
| Item | Part Number | Description | Qty |
|
1 |
Syringe Tubing Assembly Options | ||
| 4-Port, Unheated - Shown | |||
|
151941 |
Sterling |
NLA |
|
| 151941-01 | Shadow | 1 | |
| 4-Port, Heated | |||
| 151921 | Sterling | 1 | |
| 151921-01 | Shadow | 1 | |
|
NSS = Not Sold Separately | AR = As Required | NLA = No Longer Available | CFN = Call for Number Always Specify Model and Serial Number |
|||
