Procenter Cuspidor Push Button Valve Removal / Installation Test and Repair
Procenter Cuspidor Push Button Valve
Removal
The illustration shows the bowl flush button valve. The procedure for the cup fill button valves is similar.
2.Tag and disconnect all tubing connected to push button valve (1).
3.Remove barbed fitting (2) and gasket (3) from push button valve (1).
4.Loosen set screw (4) and remove knob (5).
5.Unscrew push button valve (1); then remove valve, washer (6), and trim ring (7) from bottom housing (8).
Installation
1.Insert push button valve (1) thru washer (6), and bottom housing (8).
2.Secure push button valve (1) with trim ring (7).
3.Install knob (5) and tighten set screw (4).
4.Install gasket (3) and barbed fitting (2) onto push button valve (1).
5.Connect all tubing to proper fittings of push button valve (1).
