625 Table Specifications
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Model |
625 -001, -003, -005, -006 |
Serial Number | All |
625 Table -001 /-003 /-005 /-006 Specifications | |
---|---|
Patient Weight (maximum): |
650 lbs (295 kg) |
Intended Weight: |
Between 30 and 650 pounds (13.6/295kg) |
Shipping Options and Weights: | |
Table with Upholstery | 470 lbs (213 kg) |
Table with Packaging and Skid, no Upholstery | 487 lbs (221 kg) |
Upholstery with Packaging, shipped separately | 45 lbs (20 kg) |
Power Cord Length: |
8 ft. (244 cm) |
Electrical Requirements: |
Refer to: Model Identification / Compliance Chart |
Foot / Hand Control Voltage: |
14 VAC, SELV (Safety Extra Low Voltage) |
Duplex Receptacle(s) (maximum load): |
115 VAC, 5A, 50/60 Hz |
Fuses: | |
IEC inlet fuses (2) | 6.3A, 250V, Type-T, 5 x 20 mm |
F1 and F2, on the main PC board | 10A, 250V, Type-T, 5 x 20 mm |
F3, on the main PC board | 160mA, 250V, Type-T, 5 x 20 mm |
F4, on the main PC board | 6.3A, 250V, Type-T, 5 x 20 mm |
Models with drawer heaters - Distribution board fuses (2) |
800mA, 250V, Type-T, 5 x 20mm |
Duty Cycles: | |
Motor Run Time: |
Intermittent Operation, 30 seconds ON / 5 minutes OFF |
Receptacle(s) and Drawer Heater: |
Continuous Operation |
Classifications: |
Class 1, Type B Applied Part |
Protection against ingress of fluids: |
IPXO Foot Control only: IPX1 |
Equipment not suitable for use in the presence of a flammable anesthetic mixture.
![Closed](../../Skins/Default/Stylesheets/Images/transparent.gif)
Model |
625 -004 |
Serial Number | All |
625 Table -004 Specifications | |
---|---|
Patient Weight (maximum): |
650 lbs (295 kg) |
Intended Weight: |
Between 30 and 650 pounds (13.6/295kg) |
Shipping Options and Weights: | |
Table with Upholstery |
475 lbs (216 kg ) |
Table with Packaging and Skid, no Upholstery | 502 lbs (228 kg) |
Upholstery with Packaging, shipped separately |
45 lbs (20 kg) |
Power Cord Length: |
8 ft. (244 cm) |
Electrical Requirements: |
Refer to: Model Identification / Compliance Chart |
Foot / Hand Control Voltage: |
14 VAC, SELV (Safety Extra Low Voltage) |
Simplex Receptacles (maximum load): |
115 VAC, 5A, 50/60 Hz |
Fuses: | |
IEC inlet fuses (2) | 6.3A, 250V, Type-T, 5 x 20 mm |
F1 and F2, on the main PC board | 10A, 250V, Type-T, 5 x 20 mm |
F3, on the main PC board | 160mA, 250V, Type-T, 5 x 20 mm |
F4, on the main PC board | 6.3A, 250V, Type-T, 5 x 20 mm |
Models with drawer heaters - Distribution board fuses (2) | 800mA, 250V, Type-T, 5 x 20mm |
Duty Cycles: |
|
Motor Run Time: | Intermittent Operation , 30 seconds ON / 5 minutes OFF |
Receptacles and Drawer Heater: | Continuous Operation |
Classifications: |
Class 1, Type B Applied Part |
Protection against ingress of fluids: |
IPXO Foot Control only: IPX1 |
Equipment not suitable for use in the presence of a flammable anesthetic mixture.