M9/M11 Sterilizer Test Selection Screen Test and Repair
Model Range -020 thru -022, -033, -034
|
Model |
M9M11 -020 thru -022, -033, -034 |
| Serial Number | All |
Access Service Diagnostic
I/O Test
Press the Start button to initiate the I/O Test. This test allows you to energize the air valve, vent valve, fill valve, door motor, and heating element independently without running a cycle.
This test also displays the temperature / pressure inside the chamber, and the status of the high-limit thermostats, door switch, and the water level sensor.
recall Errors
Press the Stop button to show the last five error codes displayed on the unit.
The last five error codes can also be accessed by pressing and holding the minus ( - ) button during power up. Exit the error code menu by pressing the "stop" button.
Keytest
Press the Handpieces button to initiate the Keytest. This test allows you to check the functionality of the buttons on the touch pad.
Model Range -040 thru -043
|
Model |
M9M11 -040 thru -043 |
| Serial Number | All |
I/O Test
Press the Start button for the I/O test. This test allows you to energize the air valve, vent valve, fill valve, door motor, and heating element independently without running a cycle.
This test also displays the temperature / pressure inside the chamber, and the status of the high-limit thermostats, door switch, and the water level sensor.
recall Errors
Press the Stop button to recall errors. This allows you to view tshow the last five error codes displayed on the unit.
The last five error codes can also be accessed by pressing and holding the minus ( - ) button during power up. Exit the error code menu by pressing the "stop" button.
Keytest
Press the Handpieces button for the keytest. This test allows you to check the functionality of the buttons on the touch pad.
